Diamond Body - 50 ml (sufficient quantity for a large SUV or two sedans) Diamond Body Prep - 100 ml Applicator buffer for coating application Microfiber towels for wiping Protective gloves (sizes L and XL)
1. Thoroughly clean all vehicle elements with Diamond Body Prep. 2. Shake Diamond Body well for at least 15 seconds and place 15 to 20 drops on the applicator to start it. 3. Apply the grid coating on 1 to 2 panels of the vehicle, adding a few drops if necessary. 4. Wait 3 to 5 minutes until lines or droplets appear indicating that the coating is ready to be wiped. 5. Wipe excess product with a clean microfiber (wiping time may vary depending on temperature, humidity and surface type).
Thanks to its patented nanodiamant technology, this coating surpasses traditional ceramic coatings by combining their excellent performance while eliminating the long drying time before exposure to the weather. Its advanced formula offers easier application, long-lasting protection and a professional-quality glossy finish. The kit also includes Diamond Body Prep, a new generation 3-in-1 formula that cleans, prepares and prepares the surface in a single step, much more effective than classic IPA wipes.
Suitable for all body panels, plastic trims, headlights and chrome elements. Do not use on glass surfaces (Diamond Body and Diamond Body Prep). Use separate microfiber towels for Diamond Body Prep and Diamond Body. Polishing is not mandatory but strongly recommended for an optimal result. In case of overthickness during application, immediately reapply Diamond Body on the area concerned and then wipe.