Diamond Bike - 20 ml (sufficient quantity to completely cover a bike) Diamond Bike Prep - 100 ml Applicator pad to apply the product on the bike Microfiber towels to wipe the product Protective gloves (sizes L and XL)
1. Thoroughly clean all the elements of the bike with Diamond Bike Prep. 2. Shake Diamond Bike well for at least 15 seconds and place 15 to 20 drops on the applicator to primer it. 3. Apply the coating in cross passes (gridling) on 1 to 2 areas of the bike, adding a few additional drops if necessary. 4. Wait 3 to 5 minutes until clear lines or microdroplets appear indicating that the coating is ready to be wiped. 5. Wipe excess product with a clean microfiber (wiping time may vary depending on ambient temperature, humidity and surface type).
Based on aerospace technologies, Diamond Bike is an innovative coating without drying time designed to effectively protect your bike. Thanks to its patented nanodiamant technology, it surpasses traditional ceramic coatings by combining their excellent properties while being much easier to apply. This coating offers long-lasting protection against dirt, moisture and external aggressions, without requiring a waiting time before exposure to the weather. Easy to use, it does not require any professional training or previous experience to obtain an impeccable result on all types of terrain.
Safe for all hard surfaces of the bike. Use separate microfiber cloths for Diamond Bike Prep and Diamond Bike. Polishing is not mandatory but strongly recommended for an optimal result. In case of overthickness during application, immediately reapply Diamond Bike on the area concerned and then wipe.