Diamond Glass 30 ml (enough for a vehicle of any size) Diamond Glass Prep 100 ml Applicator buffer Microfiber towels Protective gloves (sizes L and XL)
1. Thoroughly clean all windows with Diamond Glass Prep. 2. Shake Diamond Glass for at least 15 seconds then apply 15 to 20 drops on the applicator. 3. Apply the coating to 1 to 2 areas of the glass in cross passes, reapplying the product if necessary. 4. The coating must leave a slight veil visible during application. 5. Wait 5 to 10 minutes, then wipe until the surface becomes almost invisible (depending on temperature and humidity).
Diamond Glass gives your car windows extreme protection against water, frost and dirt. This nanodiamon coating is easy to apply and offers long-lasting professional results, with up to 12 months of hydrophobic protection. Thanks to its patented nano-diamond composite composition, this multi-layer coating improves visibility, stain resistance and durability in the face of wiper wear, thus reducing the frequency of reapplications. The prior use of Diamond Glass Prep is essential to remove dirt, traces and oily residues from glass surfaces for optimal adhesion of the coating.
To be used exclusively on glass surfaces. Do not apply on painted surfaces. Use separate microfibers for Diamond Glass Prep and Diamond Glass. Polishing is not mandatory but strongly recommended for an optimal result. In case of overthickness during application, reapply a thin layer and then wipe immediately. For maximum hydrophobia, apply two layers. To reduce wiper vibration, apply the product to clean brushes.