Description : New Spark 2 plateforme 2V
The BuzzRunner Spark is the best product of our platform range. You will get a full set of features at a very affordable price. Available in 3 bike version, here is a description of the 2 bike.
TOW BALL ATTACHMENT
The patented cam lever attachment system fits onto all ISO 50mm diameter tow balls. Simple, fast and secure.
The system can be locked and secured by a locking pin.
This system is one of the few that can pretend to pass the highest safety standards.
TOW BALL ADJUSTMENT
The 50mm tow balls have different neck sizes. Our system has an easy adjustment button that will increase the tightening force.
The wheel holders will accommodate all wheelbases, even very small children’s bikes.
The ratchet straps allow a quick and secure attachment of the wheels.
The straps are long enough to hold the biggest rims.
The clamps are big enough to fit most bike frames.
Made of reinforced Nylon, the clamps are highly resistant.
An integrated pad prevents scratching the bike paint and allow most brakes cables to go through.
Each clamp is equipped with a locking knob.
Genuinely easy to tilt, well balanced during the tilting phase,and tilts far enough for gate access.
In the case of some very specific cars, a tilting kit is available as an option to allow a more angled tilt.
BuzzRunner are supplied with standard 5 function lights and a 13 pin plug.
The light plate can be folded to allow easier storage.
It is very easy to install the license plate or remove it if you use the BuzzRunner on different vehicles.
Size does matter. So the new SPARK2 has been made more compact in order to fit in most car trunks.
Max number of bikes: 2
Fits bolt on tow ball: yes
Fits swan neck / detachable tow ball: yes
Dimensions (width x depth): 109cm x 59cm
(measured from the centre of the tow ball mount to the outside edge of the number plate holder).
Dimensions (folded): 94 x 67 x 31 cm
Weight: 16.1 kg
Max load capacity: 45kg
Max weight per bike: 22.5kg
Integrated lighting board: yes
Lighting board plug type: 13 pin
Bike carrier to tow ball lock: yes
Bike carrier to bike lock: yes
The maximum permitted load you can carry is also determined by the tow bar nose weight; you will need to check you don’t exceed this before using any tow ball mounted bike carrier.
Requires 65mm clearance from center of tow ball to rear of vehicle.
If you have a 7 pin socket the reversing light and fog light will not work.
The 7 pin socket isn’t wired for these functions.
Does not allow the opening of the tailgate for van-type vehicles (VW transporter, Citroën berlingot, Peugeot partner, Renault master, ...)